Offers cubic zirconia rings.

 
Offers platinum jewelry, engagement and Cubic Zirconia rings. At Cubic Zirconia CZ and Platinum Jewelry we are dedicated to service and quality. All of our customer service representatives are trained to know everything about jewelry. Our quality control department inspects all of jewelry with a twenty point inspection program that will assure your jewelry to be flawless. We are also dedicated in educating in every aspect of the jewelry purchasing process. Send us an email or call us to have the best experience of jewelry buying in your life! Cubic Zirconia is undoubtedly the best diamond simulate available today. cubic zirconia rings have successfully established itself as the high quality and affordable diamond substitute in today's fashionable jewelry market. The untrained and naked eye cannot distinguish the difference between a real diamond and Cubic Zirconia. Even gemologists cannot tell the difference unless various testing and examination is done.
 
cubic zirconia ring
cz engagement ring
 
 

Offers CZ engagement rings and platinum jewelry.

 
We offer CZ engagement rings and platinum jewelry. Cubic Zirconia is an incredible hard material similar that of a real diamond and with the introduction of color, it has great potential as a gem to fulfill elegant fashion demand at a fraction of the cost. The composition of this man made product is typically a combination of Zirconium Oxide and Yttrium Oxide both of which are opaque by nature. But when melted together under intense heat reaching almost 5,000 degrees Fahrenheit and then cooled under controlled conditions, they produce what we call Cubic Zirconia. Cubic Zerconia is colorless in its pure state. The various colors are achieved by mixing in small quantities of chemical additives. An elegant design necklace with round high quality cubic zirconias in prong setting in gold guaranteed for life. A heart shaped link necklace with high quality round cubic zirconias in prong setting in the middle of the hearts guaranteed for life. A flower necklace design with high quality round cubic zirconias in bezel setting guaranteed for life.
 

Offers Cubic Zirconia jewelry.

An adorable wedding band with high polished shank and numerous round shaped high quality cubic zirconias in a channel setting guaranteed for life. Traditional anniversary ring with high polished solid shank combined with five round shaped high quality cubic zirconias in channel setting guaranteed for life. An elegant wedding band with high polished shank and eight round shaped high quality cubic zirconias in a channel setting guaranteed for life. A stunning wedding band with a high quality polished shank and five high quality cubic zirconias in prong setting guaranteed for life. Exquisite wedding band with high polished shank and numerous round shaped high quality cubic zirconias in a channel setting guaranteed for life. Solid high polished shank with round shaped high quality white cubic zirconia in channel setting guaranteed for life. An elegant band with hand engraved sides and high quality cubic zirconia jewelry in prong setting guaranteed for life.
 
cubic zirconia jewelry
platinum jewelry
 


About Cubic Zirconia
| About Platinum, Gold, and Titanium | Manufacturing Process | Jewelry Care | Custom Jewelry | Other Resources | Size Guide

FREE
SHIPPING


RESOURCES
Platinum Casting

Casting of platinum and platinum alloys is best carried out by means of high frequency induction melting and centrifugal casting. It is advisable to utilise very small "trees" as platinum tends to solidify quickly and would not fully occupy a large or long cavity. Platinum melts at 1,7731C but it is necessary to elevate the melt to about 2,400'C before attempting to cast.

This process must be carried out with the utmost rapidity. Platinum is no friend of silica and borates, so preparation areas for platinum casting must be scrupulously clean and clear of sulphate-bonded investments as used for gold and silver.

The specific gravity of the metal is 21.45. Metal to wax ratio is 21-1.

Weigh the wax patterns and multiply by 21 to arrive at the weight of the charge of metal. The crucible used must have an extremely high thermal resistance and also be proof against thermal shock. It must also be silica-free. The metal to be cast must be cut into small plates roughly 8 x 8 x 2 mm or rods 7-8 mm diameter x 8 mm. Usually, platinum is alloyed with copper in the proportion 950 Pt + 50 Cu.

To render it more suitable for stone setting, it is usually alloyed with Palladium, for wedding rings with cobalt and with tungsten for brooches, springs, findings etc.

Platinum should never be used if its purity is uncertain. The melting crucible must be set very close to the flask on the casting arm. Melting occurs in a very short time interval.

Quenching into water should be done about fifteen minutes after casting. The phosphate-bonded investment is difficult to remove from the castings and it is usually necessary to use some form of sand or bead blaster for this purpose. Sprue buttons and scrap may be recast with 50% new metal. Precise flask burnout is, once again, very important here. Flasks should first be dewaxed at 200'C for about three hours and then fired in a burnout furnace having a time-temperature profile conforming to that shown on the chart (figure 75). For certain applications, this investment may need to be fired up to 1, 1 OO'C.